A04/01/001 16751 PART 2 Add text as follows:
2.7.1 The backboards in the Router/MDF/IDF Rooms shall be
fire-retardant ...
A04/01/002 16751 PART 3 Add text as follows:
3.4.1.2.3 Plywood shall be fire-retardant and ...
16752
OUTSIDE PLANT:
A04/01/003 16752 PART 2 Add text as follows:
2.1.1.2 [under Required Products add]
Avaya TeraSPEED cable
#760004036 5022 012A WXBK [12 count]
#760004044 5022 024A WXBK [24 count]
RISER ROOMS:
A04/01/004 16752 PART 2 Add text as follows:
2.2.2.2.2.1 [insert after section on vertical cable management]
Horizontal Cable Management
---------------------------
Chatsworth Products Inc. #12183-719
[1-1/2" bend radius for compliant installation of
Category 5/5e/6 or fiber cable]
A04/01/005 16752 PART 2 Add text as follows:
2.2.2.3.1.6 Brickwall Filters
[for use with HuskyTV-HBO]
STATIONS:
C04/01/006 16752 PART 2 Change text as follows:
2.3.1 Cable
2.3.1.1 Voice and Data
The twisted-pair cable for station drop bundles shall be
four (4)...
A04/01/007 16752 PART 2 Add text as follows:
2.3.1 Cable
2.3.1.1 Voice and Data
[under CM rated products add]
3M Part # - VOL-C5E350RX
[where X denotes color]
[under CMP rated products add]
3M Part # - VOL-C5E350PX
[where X denotes color]
R04/01/008 16752 Part 2 Replace text COMPLETELY as follows:
2.4.4 Emergency Blue Light phone units
Required Product:
Stanchion - Talk-A-Phone Radius Power Mount
with Blue Light [UW Custom Color]
#ETP - MTR
Phone Unit - Talk-A-Phone
#ETP-400V
A04/01/009 16752 Part 3 Add text as follows;
3.3.5.3 WireMold
3.3.5.3.1 Angled Mounting Adapter - Orient to minimize cable bend
radius at jack connection.
3.3.5.3.2 Jack Orientation - The "key" in the jack shall face the
highest ridge on the angled mounting adapter.
3.3.5.3.3 Jack Configuration - Regardless of the orientation of the
angled mounting adapter, configure the jacks as follows:
V1 D1
V2 D2
For data only situations, V1 and V2 position will have
blanks.
R04/01/010 SD-CM-44 Jack Position Configurations Replace one detail:
WireMold 4000 (3000) cover
Replacement diagram shows
only 2 bezels on a mounting adapter
[adapter orientation determined by cable feed location]
the key on the jack pointing to the highest ridge
V1/V2 vertically aligned on the left and
D1/D2 vertically aligned on the right
[Jack alignment is not tied to orientation of adapter.]
Communications Infrastructure
